Thank you very much for choosing the EU CE member BaoLai

Technical characteristics of BL-PC soft cable pneumatic power assisted manipulator.

The equipment makes full use of the principles of pulley block/resistance arm lever doubling and dynamic balance to lift heavy objects, and combines non-standard customized fixtures to meet various transportation needs.

1. Equipped with pneumatic intelligent lifter.

2. Fixture customization: 1) Grab type. 2) Inward expansion type. 3) Lift type. 4) Clamping turnover type. 5) The suction cup turns over. It is selected according to the workpiece and on-site environment to achieve the best use effect.

3. Installation structure; Ground fixed/ground moving/top fixed/track moving.

Optional: 1) Hand propelled chassis+power assisted manipulator. 2) Electric forklift+power assisted manipulator. 3) Truss steel structure+track+electric manual chassis pulley+power assisted manipulator. 4) Multi joint telescopic function of horizontal arm. 5) Electric adjustment of column height.

4. Arm length range; 4000mm vertical lifting; 2000mm load capacity; 120kg working time; 0.5m/s control system; Pneumatic

5. Joint rotation; Column shaft and clamp shaft can rotate 360 °, and intermediate shaft can rotate 270 °

6. Factory standard configuration; Balance control/paddle control/standard hook

7. Fixture system; Non standard customization

8. Braking system; Articulated brake (optional)

9. Main components; The folding arm manipulator composed of two groups of rotary joints is driven up and down by the flexible wire rope pulled by the cylinder through the pulley block. (Two rotary joints can be equipped with pneumatic brake).

10 Applicable scenarios; BL-PC is especially suitable for operations where the workpiece quality is relatively small, the center of gravity of the workpiece is perpendicular to the wire rope or the center of gravity offset is very small, or where manual flexibility is required for workpiece positioning. After skilled operation, the operation cycle can be controlled at about 28s-60s (depending on the difficulty of grasping the workpiece), which can meet the requirements for high operation rhythm under small load capacity.

11. Application recommendation; Bags/cartons/buckets/spindles/bars/small parts/coil handling, flexible loading and unloading and other simple workpiece handling within 120Kg (to be used with non-standard customized fixtures).